Guest Writer: Get Back on the Horse

The latest guest post is from long-time track day rider and club racer, Ian Vivero from Smelly Dog Racing who has an interesting point of view about post-crash psychology. So, listen up. The floor is yours’ Ian.


Ian #604. Photo by Arcy www.otmpix.com
Ian #604.
Photo by Arcy. www.otmpix.com

Getting Back on the Horse

In 14 years of riding I have, thankfully, only had a handful of crashes, and most were more embarrassing than anything else. Tip over’s at a stop or low speeds due to a patch of sand, a misplaced foot, etc. are common and happen to (almost) everyone in their early years. Even as a seasoned rider I recently tipped over my brand new Victory thanks to an unfortunate combination of factors. These things can hurt one’s pride, but for most we can walk away with minimal damage to self and bike, learn from our mistakes, and move on. These events are not what this post is about.
What I do want to talk about are two crashes, both of which occurred on the racetrack. The first one occurred during a track day on my 919, which was the result of a bad line that pushed me into an off-camber part of the track and left me with less than zero ground clearance, picking up my tires and putting me on the ground. The second occurred during a race in the rain when I crossed a paint line while trail braking into a corner and the front tire ran out of grip resulting in another low side.
Despite the obvious differences, there were many similarities between the two crashes. In both cases I was relatively unhurt and the damage to the bike was minimal enough to allow me to ride back to the pits. In both cases I knew exactly what I had done wrong (bad line, trail braking over wet painted markings) and how I could have avoided it.

The Aftermath

That’s the good news. The bad news is that I was left with a lasting reduction in confidence that I didn’t experience from my other get-offs. Why? Both occurred on a race track so perhaps it was the venue, though I’ve gone down on the track before and not had the same issue. And while the damage to the bike and my injuries were worse than a simple tip over, I’ve had worse mishaps that I was able to shake off. So what caused me to be so shaken up?
I believe the “when” mattered more than the “where” or “how”. You see, both crashes happened at the end of the day, which gave me no chance to get back out. Instead, I was left to wait until the next track day or race weekend to correct my mistake. This allowed my mind to endlessly replay the incidents over and over for days or even weeks.
Replaying the incident made a relatively minor crash grow into something much bigger and far scarier. When I finally did get back on track, it suddenly seemed like a dangerous place for me to be.
All of this was purely mental of course. By then I had largely recovered physically and the bike was mechanically sound. But because my mind was so clouded, my riding suffered horribly. Without realizing it, I began to fight myself in every corner, which caused me to keep running wide. To compensate I started braking earlier and crawling through the turns.
My muscles grew tired and sore within a couple laps from constantly working to keep the bike under control. My death grip on the bars left the front end feeling vague, leading to even less confidence. Each session left me more frustrated and exhausted than the last. Eventually I noticed what I was doing and began to relax and by the end of the day things seemed to be working properly again… And yet I was riding at a level far below where I had previously been. It took a great deal of time and effort to regain my lost mojo. Time and effort that could have netted some real gains were spent simply getting my confidence back.

The Takeaway

Which leaves me with this piece of advice for whoever cares to take it: The next time you drop your bike in a parking lot, lose your footing at a red light, or carry a bit too much speed at a track day and end up in the weeds, get up, get back on the bike and do whatever you just tried to do again, only this time do it right. Not only will you learn something in the process that can make you a better rider, but you will also retain your confidence before it has a chance to run off without you.


Thanks, Ian. The aftermath of a crash can be both physically and mentally scarring. I’ve seen countless riders lose confidence after a scare and either give up riding or not enjoy riding the way they had previously. While we cannot expect to avoid all mishaps, we can minimize them by riding within our limits (even when racing). Some say you have to crash to learn how to ride fast and win, but I don’t think it is a prerequisite. Yes, crashing comes with the territory of racing hard, but it usually sets you back and is generally a bad idea. You can learn to win without crashing, IMO.
You do this by learning all you can about traction and how a motorcycle stays on two wheels. This knowledge comes from many sources, including quality blogs, books, instructors and other skilled riders. But in the end, the secret to minimizing crashes is for you to apply this knowledge on every ride or race and develop sensitivity to the physics of riding well, at any speed.
Share your thoughts below.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Check out these related posts:

Subscribe to the mailing list!
Buy the Book!
 

#1 Reason Why Motorcycles Crash in Corners

Josh, looking good on his Gixxer1000 at Loudon. owenstrackdayphotos.com
Josh, looking good on his Gixxer1000 at Loudon. owenstrackdayphotos.com

Motorcycles crash for many different reasons, including in no particular order:

  1. They are not very stable when ridden slow, so tip overs are common
  2. They are hard to see in traffic, so collisions with cars is far too frequent
  3. They only have two small tire contact patches, so seemingly small things can cause traction loss
  4. They require fairly precise rider decisions and inputs when traction is near its limit
  5. Most single-vehicle crashes are the result of a too-fast corner entry speed.

Case Study

My friend and track day student, Joshua had a problem with numbers 3, 4 and especially 5.
Josh had a great day at the awesome New York Safety Track until he didn’t. Check out his VIDEOS BELOW to see how his day ended. He walked away unscathed, thanks in no small part to his quality riding gear. ATGATT, baby. The same can’t be said for his beautiful GSXR1000. It slid off the track without much fanfare until it hit some protruding piece of Earth and flipped a few times. Oh well. It’s just a machine, remember.

Below, you can read Josh’s account of the situation and what he learned.

Sky, Ground, Sky, Ground. :(
Sky, Ground, Sky, Ground. 🙁

The Fundamental Reason Why He Crashed

Riding a motorcycle is more of a mental exercise than physical. Yes, it takes physical coordination and a certain amount of strength to operate a motorcycle. But, riding a motorcycle well is much more than simply operating the machine. It also includes using excellent judgement and having deep knowledge about how to manage all sorts of situations.
Mark Brown from MotoMark1 uses the term “driving” to emphasize that you must not passively “ride” a motorcycle, but rather “drive” it with purposefulness, authority and competence.
Josh was doing great all day and, as was the case with another rider at the track that day, got over confident and pushed just a little bit harder than he should have. This mental lapse is essentially THE reason Josh crashed. A too-fast corner entry is the #1 reason for single-vehicle motorcycle crashes.

Josh and I had worked together during a Personal Instruction Day last week at the NH track on strengthening his “skill foundation” to allow him to safely “drive” his bike at the pace he is eager to achieve.
We made good progress, but the eagerness and drive Josh has for rapid improvement seems to cause him to push harder than he should. This is common with highly motivated people. I can name two other very good riders who are motivated to ride at a top level, but have not yet learned and applied all the information necessary to be able to ride at that level…yet.

All motorcyclists who are eagerly developing their physical skills must also develop their ability to monitor their attitude, self-evaluate their real progress, and use judgement that is in line with their true capabilities.

It coulda been worse.
It coulda been worse.

The Physical Solution

Now that we understand that the crash could have been avoided with a bit of “judgment double-check”, let’s talk about what went wrong and the mechanics of how the crash could have been avoided. Remember: A too-fast corner entry is the #1 reason for single-vehicle motorcycle crashes.

Because Josh had decided to “let it rip” down the straight (probably faster than he had done before), he entered the turn 1 braking zone at a higher speed than he had previously. That’s fine, BUT he did not adjust his braking behavior to match the increased approach speed. With an increase in speed comes the need to:

  1. brake earlier using the same or similar amount of brake force as when approaching at a slower speed, or
  2. use the same brake marker as when approaching the turn at the slower speed, but brake harder, or
  3. a combination of #1 and #2

Either method will work to achieve the goal of slowing to a comfortable entry speed. Braking earlier is generally the best solution where you have more time and space to modulate your brake force to slow without anxiety.


Josh did not alter his “begin braking” mark, so he found himself flying past his usual brake marker and therefore reached his turn-in point at a higher speed than he was familiar (or comfortable). You can clearly see in the forward-facing camera angle that he was missing the apex and then used greater handlebar pressure (countersteering) as he attempted to stay on the track, which overtaxed the front tire and it tucked.

An Expert’s Solution

Could the crash have been avoided in the hands of a seasoned expert? With the bike at that speed and in that position in the corner, I would say maybe, but probably not. HOWEVER,  the expert would have identified that he or she was traveling faster than before and because of this, would have adjusted the “begin braking” location to be earlier and increased the amount of brake force as needed to slow down sufficiently. Expert-level track day riders are comfortable braking very hard, because they have practiced this skill.
He or she would have also used trailbraking to further scrub off speed if necessary as the bike was eased into the corner. However, I want to emphasize that trailbraking is not really “meant” to be a technique used to salvage a blown corner. Done correctly, trailbraking is a planned method for stabilizing the motorcycle when entering corners. That said, if you have trained yourself to trailbrake as it is meant to be used, then it is at your disposal when you need a longer duration of braking force if you inadvertently enter a turn too fast. Read all about trailbraking HERE.

The Lesson

Remember that if you change one thing (faster straightaway speed), you must adjust other things (brake marker and/or brake pressure) to reach the entry speed you are able to handle. Please learn from Josh’s unfortunate mistake and keep your enthusiasm and eagerness in check and resist introducing significantly faster speeds until you understand the concept of cause and effect as it pertains to adjusting entry speed.

Crash Videos

Front view:

Rider Face View:

A message from Josh himself about what he learned:

Staying within limits is a lesson I strive to drive home to my students every weekend as an MSF RiderCoach. The motorcycle, the rider, and the time & space limits around them. My hope is that every rider I come in contact with has takeaway points and thinks about actions and decisions made while riding.
My overall goal as a rider is to learn, fine-tune, and practice as many new and advanced skills as I can. I feel the biggest joy of riding is that there is always something new to work on or perfect. Each year I try and take on something new I can use as a rider and coach. A few years ago I had an opportunity to take a course on dirt bike techniques and later on I was able to become a certified MSF Dirt bike Coach. Last year my new goal was to learn to become proficient in riding on the racetrack at speed.
I went out and bought every book and DVD I could find on the subject, and also a shiny GSXR 1000 that I thought at the time would be a perfect bike to go out and lay down some hot laps. Books and video’s are great tools, however to really be able to learn and apply the skills takes tons of coaching, practice and fine tuning.
My biggest obstacle is always trying to rush and accelerate my learning. I want so bad to be the best and smoothest that I do not take the advice I give to my students. I try and go from step A all the way to step Z in one day. Learning should be in stages and is a building block process. Learn the gross skill 1st and stay within your limits. Ken gave me the best advice of all when he said “Slow down and get smooth 1st”.
I was doing pretty good and learning the New Track. Taking my time and finding reference points and determining where I should look, brake, tip, and accelerate. It was near the end of the day with only 2 sessions left. I was a little tired and sore from working hard on my body position and riding. I started the 2nd to last session and started letting my mind drift away a little bit. I was thinking about the ride home and my fatigue level and on the video footage I had been recording all day; what I would be showing my friends and family and how cool I would look.
I decided to try one more lap and call it a day. I said to myself. “You can push a little harder and get one awesome lap to end the day.” I got to the start of the straight. I did a head check to see if I was holding up any riders. The coast was clear and I gave it all I got. I pinned the gas and tucked my head. Glancing at the speedometer I saw the numbers climbing 130,140,150. I looked up and saw the end of the straight fast approaching. I got on the brakes with a force that seemed very heavy. I was squeezing in on the tank with all my might to hold myself from pushing forward. I saw the turning point approaching fast and thought “Oh No I just blew it” I had lots of speed and not much track left.
I thought in the back of my head. You can do this, usually riders have less skills than the machine they are on. I tried as hard as I could to get into a hang off position and turn the bike. I gave it a flick into the corner and felt the front dropping out. I saw the ground rushing up to my shoulder and I lifted my head up and away from the turn. Boom, I was on the ground and tumbling, I could see the bike flipping as I was tumbling and sliding into the grass. Every second was in slow motion as I could hear the plastic cracking and breaking off the bike.
It seemed like I was going to slide forever and I was saying to myself. OK, please stop now. Once stopped I stayed still, counted to 10 and started to assess if anything was hurt or broken. Not even a scratch. All the gear I had invested in paid off big-time! I looked at the bike and wanted to cry. I knew as I started to scream down the straight I was pushing too hard. I had not taken the advice I want to instill in every single student. I got up and started looking the bike over. Seeing everything all smashed is a feeling I could do without. The session still had 15 minuets to go and all I could do was stand there and wave as my friends and fellow riders went by making smooth turns and having a blast. Sometimes we do not take our own advice and need a hard lesson to set us straight.
Josh


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





 
Add your comments, below.
submit to reddit

Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

Countersteering Will Save Your Life!

Getting a big (or small) motorcycle to turn requires more than just body weight.
Getting a big (or small) motorcycle to turn requires more than just body weight.

It’s hard to imagine that so many so called “experienced” riders either fail to understand the importance of countersteering or fail to recognize that countersteering is how motorcycle really turns.

Let’s Get This Straight

A motorcycle turns by leaning. Once the bike is banked over, the geometry of the chassis, as well as the rounded profile of the tires and hard-to-describe forces cause the machine to arc around the curve. So, to turn a bike you must get the motorcycle to go from upright to leaned…precisely and efficiently.

I Don’t Need No Stinking Countersteering

A lot of riders believe that they are able to maneuver their motorcycle by simply leaning their body or by looking into the turn. While these are helpful techniques for assisting the bike to turn, they alone cannot effectively cause a 500+ pound machine to change direction.
“Yeah, but I can turn my bike without countersteering.” Um, not really.  Sure, you can cause the bike to drift into a turn, but that’s not what can be called “turning”. Also, consider that most people who don’t think they are countersteering really are, they just don’t know it. Pay close attention the next time you are making any sort of turn and notice how you put a slight amount of pressure on the inside handlebar.

What Really Happens

In case you don’t already know, THE most effective way to get a motorcycle to go from upright to leaned is to introduce handlebar inputs. By pressing forward (and to a lesser degree, down) on the handlebar on the side that you want to turn, you essentially unbalance the bike so that it “falls” into a lean. Press on the right handlebar to initiate a lean to the right and press on the left handlebar to turn left. Got it?
You can enhance this effect by also simultaneously pulling on the other handlebar. This is how racers achieve quick changes in direction in chicanes on the racetrack.
Once the bike is leaned, then the front tire will steer slightly into the direction of the turn. You must relax your arms to let this natural balancing effect occur otherwise it will feel as if the motorcycle is not able to maintain the cornering path. Press, and then relax.

Why You NEED to Know How to Countersteer

Countersteering is used whenever you need to change direction. This applies to basic cornering maneuvers, as well as evasive maneuvers, such as swerving. It’s also important to be able to countersteer with authority when a corner suddenly tightens more than you expected, or when you approach a tight corner at a too-fast speed.
Not being able to get your motorcycle turned quickly will eventually result in an off-road excursion or collision with an oncoming car or a guardrail. Seriously!

Prove It To Yourself

If this makes no sense to you, then it’s time to practice. Take a look at the video clip below from the RITZ DVD for more information on countersteering and to see some drills that will help you master countersteering.
 

Read this article that Ken wrote for Motorcyclist Magazine about countersteering.

Listen to the Countersteering PODCAST
Add to the list in the comment section below.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Buy Ken’s new book, “Motorcycling the Right Way”.

Read about strategies and techniques that increase safety, confidence and enjoyment.

Click Here for details.MRW-cover
 
 
 
 


Check out these related posts:

submit to reddit

Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

"Riding in the Zone" Personal Training

AMA Charter Certificate
AMA Charter Certificate

The Riding in the Zone Motorcyclist Training Program is kicking off it’s third season with the support of the American Motorcyclist Association and the Massachusetts Rider Education Program (MREP).
I’m excited to see the RITZ street riding program grow. Students are signing up now for the summer. If you’re interested in participating, please visit the Personal Training Tours Page.

Scholarship Possibilities

One of this year’s students was able to receive the Paul B. Memorial Scholarship from the BMW/MOA Foundation for rider education. Here is an article about another rider who received a BMW/MOA scholarship to attend Lee Park’s Total Control course.
I understand that the cost can be prohibitive for many, which is why I will be reaching out to other organizations and put together a list of available scholarships. If you know of such a program, please drop me a line. My goal is to make this program available to as many motorcycle riders as possible.

Available Dates

I am scheduling training tour dates during the week when possible, but a weekend day is not out of the question.

Ken teaching an MSF course.
Ken teaching an MSF course.

Group Training Tours

Personal Training Tours are designed for one or two riders, which allows individualized training.
However, group days can be arranged. Last season, we conducted a two-day tour with the Women’s Motorcyclist Foundation Road to the Cures Program. If your group of friends or a club wants to talk about a training day (or weekend), Give me a shout.
Read more HERE.
Also, read the Personal Instruction web page to learn all about the Program. If you have any questions, Contact Me.

Please Read the Payment and Cancellation Policy Page.


 

Guest Writer: Track Day Rain Riding

Adam Butler is the first ever RITZ guest blog contributor. Adam is an expert level roadracer with the Loudon Roadracing Series and is one of my co-instructors for Tony’s Track Days. You can read Adam’s biography here
Let’s see what Adam has to say.


Do you like riding in the rain? I sure do!!

by Adam Butler

Adam Butler: "If you could see the smile inside my helmet".
Adam Butler: “If you could see the smile inside my helmet”.

If you ride track days on a regular basis chances are that you will find yourself presented with a rainy day. Some of us really find riding in the rain a fun and rewarding experience while others do not embrace the wet conditions as much. Some riders just don’t want to get wet. Others feel intimidated by the reduced traction available and don’t want to take a spill. I can understand the desire to keep your bike shiny and clean.  I prefer to take the chance to get out in the wet and work on my traction management. Riding in the rain presents a great opportunity to hone your smooth riding technique.

Ribbit!

There are some things that you can do to make your wet time on the track more enjoyable. The number one thing you need is a good frame of mind. If you go out with an open mind and a positive attitude you will have much more fun and success. It’s easy to have a fun, positive attitude in the dry…heck, we all love carving turns on a dry 70 degree day. Having this same outlook in the wet will make your experience much better.

Stay Dry and See

There are some gear related things that you can do to help. Some basic rain gear will help you stay dry. I have a basic Frogg Togg two piece outfit that goes over my leathers.
This will keep me from getting soggy. Some good no fog treatment for your face shield helps you see better. (Ken: FogCity shield inserts are one option)

Tires

The last thing is to make sure your tires are in good shape. Any time you are on the track you need to make sure you have good quality tires. Dedicated rain tires are great but you can have a good time on street tires too.
Traction management in the wet all revolves around being smooth. When the conditions are wet there is less traction available. So naturally you will be able to get away with fewer mistakes. I start out slow and easy. I start my ride nice and easy and get a feel for the conditions. Then gradually increase my pace as my comfort level increases. The key is to stay relaxed. For me, that involves keeping a light attitude. I often will chat to myself or sing a little.
So next time it rains at a track day head out and give it a whirl. Just remember to bring your smile with you…. 🙂
 
To read more about traction management check out these posts:

 
What are your thoughts about riding in the rain, either on the street or on the racetrack?
Subscribe to the mailing list!
Buy the Book!


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Check out these posts:


How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 


Traction Seminar: Motorcycle Tires

Ken and Tony from www.tonystrackdays.com speak about tires at the Traction Management Seminar at the Thompson Speedway Motorsports Park.
More video of the seminar to come. Thanks Eric R. for filming.

Share your thoughts about tires and ask any questions below.
Subscribe to the mailing list!
Buy the Book!


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

How to Preserve Traction by Managing Load

The amount of traction depends on tires, pavement and load.
The amount of traction depends on tires, pavement and load.

Last weekend I conducted a seminar at the Thompson Speedway (in CT) and I thought I’d share a particular concept that came up during the presentation… the concept of “load management”.
When I first verbalized the term, I thought it sounded like the material for a crass poop joke. But, it is a concept I believe every motorcycle rider should adopt as a way to ensure that you have a sufficient amount of traction.

Traction Theory

Before I talk about specifics of load management, it makes sense to lay some theory on you. In its most basic form, traction is the friction between your tires and the road or track surface. This friction can vary greatly depending on several factors, including tire compound, condition and temperature, as well as the quality of the pavement surface (or dirt for you dualies out there).

Pavement texture affects the amount of traction available.
Pavement texture affects the amount of traction available.

But wait. The quality of your tires and the surface is only part of the traction equation. The other part is the amount of load that is placed on the tire’s contact patch. The more weight or load that each tire is supporting directly relates to the amount of grip each tire has.

Practical Application

When you brake, the front suspension compresses as the weight of rider and bike pitches forward. This increases front tire traction. But, at the same time, the rear suspension extends and the load (and traction) at the rear tire decreases. More traction on the front means you can use the front brakes harder. But, it also means that there is less load at the rear and therefore less rear tire grip for hard use of the rear brake. Load shifts constantly with every maneuver you make…braking, cornering, swerving, accelerating etc.
Loads also shift with the terrain. Riding uphill shifts weight rearward. Riding downhill moves the load to the front. Riding over bumps also causes momentary shifts in load and changes in traction. Road camber also affects load.

Managing Your Load

If you grab the front brake, you'll skid the front tire.
If you grab the front brake, you’ll skid the front tire.

So, managing traction requires you to manage the location and amount of load. This means making sure your front tire is sufficiently loaded before you introduce maximum front brake force. Squeeeeeze the front brake lever. It also means easing off the rear brake as load pitches forward when you brake. The key is to apply the brakes only as much as the tire can handle, which means paying attention to the amount of load there is on each tire.
Now, too much of a good thing is too much of a good thing. In this case, you can overwhelm the front tire while braking and skid. However, if you squeeze the front brake progressively then you should not have this problem. If you grab the brake, then you risk locking the front wheel.
Managing traction while cornering downhill requires balance between speed control and acceleration.
Managing traction while cornering downhill requires balance between speed control and acceleration.

You can also overwhelm and push the front tire into a lowside skid when cornering hard. To avoid this, you need to get on the throttle just after you initiate lean to balance load between the front and rear. If you coast through the turn, you’re asking the front tire to not only manage the cornering forces, but also the engine braking forces caused by not getting on the gas.
The amount of throttle used should be just enough to transfer load to the rear tire. Do this by gradually rolling on the throttle. DO NOT twist the throttle to the stop or you’ll overwhelm the rear tire and spin it out of control.
The best riders are keenly aware of the amount of traction they have available at any given time. They also use advanced techniques that minimize abrupt spikes in load and allow the tires to maintain grip.Some of these techniques include brake and throttle overlap, trailbraking, and advanced body positions that allow the suspension to work fluidly.
Start by paying attention to how load affects traction, then move on to developing these advanced techniques for load and traction management. I’ll write about these techniques in future blog posts, but you can read about them now by ordering your copy of Riding in the Zone.
In the meantime, click here to read more about traction and How to Develop a Traction Sense.
Share your thoughts below on how you manage traction and load.
Subscribe to the mailing list!
Buy the Book!


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

How to Develop a Traction Sense

Tony-leanI’ve been thinking a lot about traction lately, partly because it is kinda scarce around my house with ice covering my driveway and walkways, making every step a leap of faith. The other reason I’ve been thinking about traction is because I’m putting the final touches on a presentation on Traction Management at the new Thompson Speedway next week.
Writing the presentation outline made me think how much traction management is a part of almost every moment of our lives. Walking, driving, and even showering all require a certain level of traction management. We don’t always think of these mundane things as tasks that require “traction”. But, our brains are constantly calculating whether our footing is secure enough to prevent us from slipping in the shower, or sliding down stairs, or careening off the road.

Traction Senses

Having enough available traction is critical for safely riding a motorcycle. But, are you as sensitive about your tire’s traction level as you are the traction level of your footing when you step into a shower? Most people would have to answer “no”.
That’s partly because when you are riding a motorcycle, the interface between your nerves and the ground is insulated by tires, suspension, a frame and a seat. When you’re standing in the shower the nerves in your feet are almost directly connected to the tub so that it is easy to tell whether the surface has enough grip to not slip. If you’re not sure, you simply move your foot along the surface to determine whether you must take extra care.
Once you’re out of the shower and dressed, your shoes separate the bottom of your feet from direct contact with the floor, which adds a level of complexity when determining traction. In this case, we rely more on the whole nervous system to tell whether our shoes have enough grip or not.
Your proprioceptive senses are the senses that communicate with your brain and muscles to keep you safe. Proprioceptors tell you about the relative position of body parts and strength of effort being used as you move. They are located in your muscles and joints and help you perceive your body in space. A slight slip will trigger your proprioceptive senses to tell your brain and muscles to react to regain balance.

Riding stiff in low traction situations is a bad idea.
Riding stiff in low traction situations is a bad idea.

Get a Grip

On a motorcycle, you must develop the ability to sense whether your tires have enough grip on the road for you to remain upright. But, how is this possible?
First, you must learn to “read” the information being delivered by your motorcycle’s tires and chassis. Your bike’s components are speaking to you through the language of slip angles and aspects of balance that include roll, pitch, and yaw. As your bike leans, dives and squats, your nerves are calculating whether your bike is in balance and on the intended path or at the beginning of a loss of control.

A relaxed posture allows clear communication between you and your tires.
A relaxed posture allows clear communication between you and your tires.

You feel this through the footpegs, handgrips, and seat. Keeping firm, but relaxed contact with the grips and pegs and riding with a relaxed posture will allow the best transference of information between your tires, the suspension and your nervous system.
Everyone who rides has a traction sense, otherwise we would never be able to trust that we would make it out of our driveway, let alone negotiate corners at speed. A rider who is able to manage less-than-ideal traction situations is highly proficient at sensing what the tires are doing. The information is there, you just have to listen.
Share your thoughts on developing a traction sense.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

How to Survive Hairpin Turns

Practice tight turns in a parking lot.
Practice tight turns in a parking lot.

The biggest problem riders have when dealing with hairpin turns is their anxiety about being able to make the turn. It’s a good idea to practice tight turns in a parking lot before you encounter challenging hairpin turns. Read more about slow speed riding techniques.

Slow Approach

One of the most likely reasons for a crash in a corner is entering too fast. When dealing with downhill hairpin turns, you also have the additional force of gravity pushing you downhill.
The trick is to get your bike slowed early and smoothly and then carry a bit of brake force past turn in to keep the bike stable, Read about trailbraking for more detail. Just be sure the surface is clean enough to allow slight braking while cornering.

Throttle On

When making slow turns, it is important that you maintain slight, steady forward drive for stability. If you chop off the throttle, you’ll probably fall.
A bit of forward drive takes some of the load off the front tire when going downhill and gives you forward momentum when going up a hill. It also maximizes ground clearance.
But, be careful. If you are abrupt with the throttle, either by accelerating too hard or by chopping off the throttle, you risk running wide, overtaxing the tires and upsetting the chassis and balance

Downhill turns are challenging enough to put a sign up.
Downhill turns are challenging enough to put a sign up.

When approaching a downhill hairpin curve you need to slow down more to manage gravity, but also to allow you to crack the throttle slightly for maximum stability. From a slow entry speed, give the bike enough throttle (as soon as you begin to lean) to maintain steady drive through the whole curve. Try not to decelerate. Be sure to look well into the turn, at the corner exit.

Uphill Hairpins

When going uphill, you can approach with a bit higher speed. But, slow down enough to allow steady throttle throughout the whole turn. Be sure not to use too much throttle that you cause the front tire to lose traction and “skate”, which can push your bike too far to the outside of the turn. You also don’t want to overload the rear tire with too much acceleration force. Steady, gradual throttle at the beginning of the turn is the key. Again, keep your eyes pointed all the way to the turn’s exit.

Look through the turn and accelerate slightly.
Look through the turn and accelerate slightly.

Enough Speed

Whether going up or down hill, you need to keep your speed above about 10 mph to maintain balance and stability. Sometimes, people simply fall over because they are going too slow. At very low speeds, slight deceleration or shift in body weight (tell passengers to remain relaxed, but still) is enough to upset balance and cause a tip over. Aim for smooth, steady drive.

Look Toward the Exit

Your eyes help direct your bike to where you are looking so look where you WANT to go. Turn your head to ratchet your eyes through to corner, always looking to the next visual target…entry, apex, exit. Read more about visual skills here.

What’s My Line?

It's important to get this right.
It’s important to get this right.

Try to select a cornering line that allows you to get your steering inputs done early and so the throttle finishes the turn. This usually means an outside-inside-outside path of travel. There are many advantages to this line, including a wide view through the turn and the ability to perform a quick turn-in that gets the bike turned early. It’s common for riders to fall in slow, tight corners because they introduce mid-corner steering inputs at the time when the front tire is already working hard.

Obligatory Crash Video

Here’s a video of my friend Matt who found out how a slight miscue in a slow, tight turn can put you on the ground. He was a rather new rider at the time and was spooked by the traffic. The bike was borrowed, so it was not familiar to him, either. He was unhurt. Erik from Twisted Throttle evaluates the crash protection from SW-MOTECH.

Why do you think Matt crashed? I’ll give my opinion in the comments below after some of you respond.
What tips do you find useful when dealing with hairpin turns?


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Check out these related posts:

submit to reddit

Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

Personal Instruction Now Available

This post is different than others you’ll find in the RITZ blog. It’s an announcement about a new personal training program I am starting for the 2014 season.

The students of the 2013 on-street training program.
The students of the 2013 on-street training program.

Last season, I facilitated an on-street training program with the Women’s Motorcyclist Foundation. Nine women and one man met in my neck of the woods in the Berkshire Hills of western Massachusetts where we learned, rode and laughed for two days. It was a great time and everyone learned more than a few things about cornering, slow speed maneuvers, and just how much fun the roads are where I live.
While this was a great experience, it required a lot of effort and energy. So, instead of continuing with a program that involves large groups, I decided to offer individual training, with the possibility of up to 3 people in a group.
Read the Personal Instruction web page to learn all about the Program.
Ready for some personal training.
Ready for some personal training.

For Street Riders

Three years ago, I started an on-track personal training program with Tony’s Track Days, which is a satisfying and effective way to share my knowledge with others while riding on the racetrack. I hired some of TTD’s most experienced staff to join me in offering this instruction.
The new on-street program carries much of what I have learned as a track day instructor and applies it to the street. This will not be a lesson on how to ride fast on the street. Instead, it will be about developing and refining skills that may be lacking.
What you do with your newly learned abilities on your own time is your business. But, I will be insisting that my students always ride within the limits of the street.
If you want to ride fast with me, sign up for Personal Instruction during a TTD track day.

What’s the Benefit?

I’ve become pretty good at identifying areas where people can become more proficient at riding a motorcycle. It’s one thing to sit in a classroom and it’s quite another to have an experienced instructor give immediate feedback about your specific riding strengths and weaknesses.
We will work together to refine existing skills and to help you master areas that may cause anxiety. I will custom tailor the day to focus on those specific needs.
I’ll be using two-way Bluetooth communicators to give real-time feedback. It’s a great way to apply concepts and make them habits. These are the same units we use on the racetrack.
I expect most riders will want to take advantage of beautiful and challenging twisty roads to help master cornering techniques and confidence. Braking, accurate steering, throttle control and advanced visual acuity are all things we will work on to make you a better and safer rider.
If riding in traffic is your concern, then we will head to the land of cars and trucks where I will share with you my strategies for surviving in traffic.
Read the Personal Instruction web page to learn all about the Program. If you have any questions, Contact Me.